Liquid
Refrigerant Receiver serves as a reservoir for refrigerant during
normal system operation. It allows the system to react to widely varying
load demands and provides a place to store the refrigerant charge
during pump down servicing.
LRRV-3350-3 & LRRV-3410-5 are vertical model with sweat by sweat configuration with
no valve.
can make custom model receiver in both vertical and horizontal types
which can be direct replacement for popular competitive models.
Application :
• Receiver are selected based on the operating charge for all
system components and liquid lines.
• Receivers should be sized in such a way that more than 90%
of the total internal volume of the receiver is used.
Design Features :
• Solid copper connection made from seamless (99.90%) copper
tube which has a very high burst strength.
• High Brazing strength on inlet and outlet connection helps
to stand flame temperature while fixing the receiver into the system.
(Please follow brazing instruction)
• Bottom mounting stud are not welded or hand brazed but projection
welded thus avoiding chances of leakage and also giving a neat look.
• Leak testing : Three stage high pressure leak testing done
with dry N2. (a) Before assembling on inlet and outlet tube connection
(b) After Co2 welding (c) After painting. Receiver can also be shipped
with an internal atmospheric pressure of dry N2 ranging in pressure
from 12 to 30PSIG. This prevents moisture from entering the receiver
while stored and presence of pressure also confirms no leaks in particular
piece at the time of fitting .
• Paint : Corrosion resistant oven baked paint done on rugged
steel shell after proper cleaning, treating and drying for high salt
pray rating and can be used in all environments and adverse condition.
• For use with CFCS, HCFCS, HFCS, and lubricant combination
that go with it.
• Receiver inlet and outlet is designated on the label.
• OEM approved design.
• Tested for 2500 PSIG as minimum bust pressure and 450 PSIG
maximum working pressure.
LRRV-3350-3 & LRRV-3410-5 are vertical model with sweat by sweat configuration with
no valve.