With the advent of new HFC refrigerant and Polyolester lubricants,
we must evaluate the way in which we protect our systems. The synthetic
oil are highly hygroscopic that attract moisture several times more
than mineral oils. This increase the amount of moisture in a system
which if left untreated will form organic and inorganic acids and
finally lead to the formation of copper chloride. These contaminants
are very harmful and they attack the system and their components
effecting their performance.
The DC-48 molded core is composite of carefully selected desiccant
materials, artfullyblended with a low content binder providing very
high mechanical strength, outstanding filtering capability, high
moisture adsorption and acid removal.
Other Feature:
•
Solid Rugged Construction Core with 100 % molecular sieves for maximum
contaminant removal characteristics and micronic filtration.
• High degree of activation in core gives it maximum water
retention capacity, excellent acid removal characteristics and the
ability to remove the products of oil decomposition.
• Optimized, uniform grain size and large surface and filtering
area of the porous core in which refrigerant can travel around,
gives triple filtration and laminar flow catches a large amount
of dirt with negligible pressure drop.
• The molded core has a uniform porosity through out the entire
length and surface of the core that removes large amount of water
in one pass.
• DC-48 Solid Core has ability to withstand pressure surge
and vibration and attrition is not a concern as it is with loose
fill or compacted bead style.
• Formulated to use with the new refrigerant R-134a, R-404a,
407a,R-410a, R-507, R-22 etc. blends and synthetic polyolester oil
and lubricants which go with it.
• DC-48 Solid Core provides superior suction line compressor
protection.
• DC-48 Solid Core are individually packed in metal cans,
fully activated and hermetically sealed against moisture and dirt
to preserve freshness.
• Each packed can contains a triple gasket. Physical dimension
and gasket sets are of size that permit interchangeability with
competitive products and is with the better flow capacity.
