Sealed solid core clean up drier for use
in a system suction line has developed and introduced by . The compact design incorporates a large outside diameter shell
with large core, of activated alumina and molecular sieves with moisture, high
acid and oil breakdown capacity content and excellent filtering capability area
to ensure the maximum system protection against harmful contaminates.
The core material has been designed with controlled porosity which effectively
removes and holds a maximum amount of the contaminate with a minimum pressure
drop. In addition the core material collects and holds inorganic acids and
other harmful contaminates present after motor burn out.The special binding process of the core
protects it from acid decomposition.
suction line filter drier is used in air-conditioning, heat pump and
refrigeration system, recovery machine and in which the available space in the
suction line is limited such as in heat pump application.
DESIGN FEATURES
1) Dual Schrader access valves on both inlet and outlet sides
enable the serviceman to measure amount of pressure drop accurately and also
make it easy to determine if pressure drop does exit. 2) Rugged steel shells for shock resistance. 3) Acid and moisture removal by a large volume of activated
alumina and molecular sieves in the heart of filter drier with minimum pressure
drop creating an anti acid filter drier function. 4) Great efficiency for acid, wax binding and oily sludge
neutralization at all temperature with the help of solid core desiccant block composition
but without any distortion even at high temperature. 5) Environment protection and savings of refrigerant due to
recycling. 6) Filtration at outlet prevents the propagation within the
circuit, of particles bigger than 10 to 12 microns. 7) Safe working pressure. 8) Designed for permanent installation. 9) High filtration capacity with low pressure drop at high flow
rates of suction gas with full flow fittings and excellent for burn out clean
up. 10) Choice of copper solder end or Flare connection. 11) Can be used on all CFC, HCFC and HFC refrigerant and
lubricant combination.
.